Turboflame Burner

SERIES 6575

Wesman TurboFlame 6575 Burners are dual fuel high velocity, low Nox burners. These are used specially in ladle heaters,
aluminium melting, rotary kilns, heat treatment and many more applications where high turndown, uniform heat
distribution and heat penetration are required.

FUEL TurboFlame burner is designed for light oil and gases.

CONSTRUCTION Steel fabricated body with 1650 C dense castable
blocks/tiles.

OPERATION TurboFlame are suitable for furnace 0 temperatures up
to 1300 C. Due to reduced discharge area of the burner block, real high velocity of the TurboFlame burners are
generated. Flame Velocities ranging upto 225 M/Sec can be obtained. Fuel rich operation is not recommended. burner
blocks should be installed as per WESMAN manual.

CONTROL TurboFlame can be controlled using pressure balanced
system, fuel/air ratio controller or mass flow control.

IGNITION An interrupted gas pilot is required for ignition with
oil or gas. Direct Spark ignition is satisfactory for gas operations only. Torch Lighting of these burners are not
recommended, due to the high tile pressures.

FLAME UV Flame sensor are preferred.

REQUEST A QUOTE