GENERAL DESCRIPTION AND SPECIFICATION OF 1200 MM DIA ROTARY TABLE FEEDER

Wesman Rotary Table Feeder will consist of a power driven circulated plate rotating directly below a hopper / bunker.  A feed collar located immediately above rotating table used in conjunction with an adjustable plough, determines the volume of material discharged.

The lower edge of the feed collar will be parallel to the table with a predetermined gap from table top.  This arrangement permits equal quality of material to flow under the collar and spread over the table as it resolves.  The material is then ploughed off into the discharge chute.  The plough inside the feed collar.

The major components of the Rotary Table Feeder will be :-

The table will be fabricated from 12 mm thick m.s. plates and will be mounted on the output shaft of the gearbox. The table  will be driven from the output shaft of the reduction gear.

Adjustable plough assembly.

Guard ring assembly.

Drive equipment will consist of TEFC sq. cage induction motor coupled through V-belt equipment to the input shaft of a totally enclosed oil imersed worm reduction gearbox.  The drive unit will be mounted on a fabricated m.s. base frame. 

The Rotary Table feeder will have following technical parameters:

TABLE DIAMETER : 1200 mm

CAPACITY : 5 TPH

MOTOR : 3 H.P.

GENERAL DESCRIPTION AND SPECIFICATION OF1500 MM DIA ROTARY TABLE FEEDER

Wesman Rotary Table Feeder will consist of a power driven circulated plate rotating directly below a hopper / bunker.  A feed collar located immediately above rotating table used in conjunction with an adjustable plough, determines the volume of material discharged.

The lower edge of the feed collar will be parallel to the table with a predetermined gap from table top.  This arrangement permits equal quality of material to flow under the collar and spread over the table as it resolves. The material is then ploughed off into the discharge chute.  The plough inside the feed collar.

The major components of the Rotary Table Feeder will be :-

The table will be fabricated from 12 mm thick m.s. plates and will be mounted on the     output shaft of the gearbox. The table  will be driven from the output shaft of the reduction gear.

Adjustable plough assembly.

Guard ring assembly.

Drive equipment will consist of TEFC sq. cage induction motor coupled through V-belt equipment to the input shaft of a totally enclosed oil imersed worm reduction gearbox.  The drive unit will be mounted on a fabricated m.s. base frame.

The Rotary Table feeder will have following technical parameters:

TABLE DIAMETER : 1500 mm

CAPACITY : 10 TPH

MOTOR : 3  H.P.

GENERAL DESCRIPTION AND SPECIFICATION OF 1830  MM  DIA ROTARY TABLE FEEDER

Wesman Rotary Table Feeder will consist of a power driven circulated plate rotating directly below a hopper / bunker.  A feed collar located immediately above rotating table used in conjunction with an adjustable plough, determines the volume of material discharged.

The lower edge of the feed collar will be parallel to the table with a predetermined gap from table top.  This arrangement permits equal quality of material to flow under the collar and spread over the table as it resolves.  The material is then ploughed off into the discharge chute.  The plough inside the feed collar.

The major components of the Rotary Table Feeder will be :-

The table will be fabricated from 12 mm thick m.s. plates and will be mounted directly on the output shaft of the gear-box turret assembly fitted with bearings. The table  will be driven from the output shaft of the reduction gear.

Adjustable plough assembly.

Guard ring assembly.

Drive equipment will consist of TEFC sq. cage induction motor coupled through V-belt equipment to the input shaft of a totally enclosed oil immersed worm reduction gearbox.  The drive unit will be mounted on a fabricated m.s. base frame. 

The Rotary Table feeder will have following technical parameters:

TABLE DIAMETER : 1830 mm

CAPACITY : 25 - 30 TPH

MOTOR : 5  H.P.